Aquarium pH Up 500g Fish Tank Raise pH 92083 92083 Aqua One Treatment Health

Use an Aqua One pH Test Kit to test the pH in your aquarium. Where the pH is too low, use Aqua One pH Up to increase pH as follows:

1. Using the 2g spoon provided, measure the desired amount of Aqua One pH Up into a clean plastic container. Eg. Use 2g of Aqua One pH Up per 40L of aquarium water to raise the pH by 0.4 per 24 hour period. Every aquarium is unique and many factors affect pH. Use the dosage rate as a guide only and any pH adjustment should be made slowly over time.

2. Place some aquarium water from your aquarium into the plastic container and stir to mix the solution.

3. Once dissolved, add the mixture to your aquarium slowly over a 15 minute period. Avoid pouring the mixture near the filter inlet or directly onto fish. Instead, pour the mixture near the outlet of your filtration system.

4. Re-test the pH after 12-24 hours and make adjustments as required

ACTIVE CONSTITUENT:
Sodium Bicarbonate

To calculate your approximate aquarium water volume: (Length x Width x Height in cm). Divide this number by 1,000 to give the volume in Litres.